Cart

Your Cart is Empty

Back To Shop

Cart

Your Cart is Empty

Back To Shop
Sale

APC Smart-UPS X Battery Backup & Surge Protector with SmartConnect VC84643767003

Original price was: $1,601.99.Current price is: $99.00.

(In Stock)

SKU: VC84643767003 Category:

APC 1000VA Overview

  • 1Description
  • 2General Features
  • 3Serviceability
  • 4Adaptability
  • 5Availability
  • 6Manageability
  • 7Safety

Designed for servers, point-of-sale, routers, switches, hubs, and other network devices, the Smart-UPS X Battery Backup & Surge Protector with SmartConnect from APC has a 2 RU form factor and delivers intelligent and efficient network power protection from entry level to scalable runtime. It can provide up to 8.2 minutes of use when running a full load of 900W and up to 20.9 minutes of use when running a half load of 450W

This Smart-UPS X features an output of 900W / 1000 VA, a nominal input of 120V @ 50/60 Hz 3 Hz, an input voltage range of 82-143V, eight NEMA 5-15R battery backup outlets, an 8.01′ NEMA 5-15P input connection, a surge energy rating of 600 joules, line interactive topology, and a sine waveform output. Included PowerChute Network Shutdown management software helps to provide unattended, yet proper shutdowns of network operating systems, and also included is an Ethernet cable, rack mounting brackets, removable support feet, an RS-232 cable, and a USB cable. Support is provided by a limited 3-year repair or replace warranty, a limited 2-year battery warranty, and a limited lifetime $150,000 equipment protection policy.

The APC SmartConnect ports allow the run time of this unit to be extended. When using five SMX48RMBP2U external battery packs, this UPS can last for over 3 hours at 900W. You’ll also be able to view the status of your UPS through a secure web portal. Through this remote management interface, you’ll receive automatic notifications, firmware updates, and advanced support.

General Features

Serviceability

Battery Failure Notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

User-Replaceable Batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).

Resettable Circuit Breakers

Enables a quick recovery from overload events.

Predictive Failure Notification

Provides early-warning fault analysis ensuring proactive component replacement.

Hot-Swappable Batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.

Adaptability

Adjustable Voltage Sensitivity

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Adjustable Voltage-Transfer Points

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Availability

Disconnected Battery Notification

Warns when a battery is not available to provide backup power.

Automatic Self-Test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery.

Power Conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Automatic Restart of Loads After UPS Shutdown

Automatically starts up the connected equipment upon the return of utility power.

Intelligent Battery Management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Temperature-Compensated Battery Charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Manageability

Audible Alarms

Actively lets you know if the unit is on battery, if the battery is low, or if there is an overload condition.

Network Manageable

Provides remote power management of the UPS over the network.

LED Status Indicators

Quickly understand unit and power status with visual indicators.

USB Connectivity

Provides management of the UPS via a USB port.

Serial Connectivity

Provides management of the UPS via a serial port.

Safety

Safety Agency Approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UPC: 731304401124

In the Box

  • APC Smart-UPS X Battery Backup & Surge Protector with SmartConnect
  • Ethernet Cable
  • USB Cable
  • RS-232 Cable
  • Rack Mounting Brackets
  • Removable Support Feet
  • Limited Lifetime $150,000 Equipment Protection Policy
  • Limited 2-Year Warranty (Battery Only)
  • Limited 3-Year Repair or Replace Warranty (Hardware Only)

More from manufacturer

    Table of Contents

    • Description
    • General Features
    • Serviceability
    • Adaptability
    • Availability
    • Manageability
    • Safety

    APC 1000VA Specs

    General

    Total Outlets 8 x NEMA 5-15R (4 Transformer-Sized)
    Protected Outlets 8 x NEMA 5-15R (Battery and Surge)
    Plug Type NEMA 5-15P
    Data Line Protection RJ45
    Communications USB via Type-B
    Serial via RJ45
    Emergency Power Off (EPO) Support Yes
    Noise Filtering 5%
    Topology Line Interactive

    Power

    Surge Energy Rating 600 Joules
    Maximum Current 12 A
    Maximum Wattage 900 W
    Nominal Input Voltage 120 VAC
    Input Voltage Range 82 to 143 VAC
    Input Frequency 50/60 Hz 3Hz (Auto Sensing)
    Nominal Output Voltage 120 VAC
    Output Frequency 50/60 Hz 3Hz
    Voltage Distortion <5%
    Load Capacity 1000 VA
    Thermal Dissipation 82 BTU/Hour
    Maximum Efficiency 98.9%
    Waveform Sine Wave

    Battery

    Chemistry Lead-Acid
    Full-Load Runtime 8.2 Minutes
    Half-Load Runtime 20.9 Minutes
    Recharge Time 3 Hours
    User Replaceable Yes
    Replacement Battery CURK116-01-02
    Hot-Swap Support Yes
    External Battery Connection 1 x IEC Jumper

    Environmental

    Operating Temperature 32 to 104F / 0 to 40C
    Operating Humidity 0 to 95%
    Storage Temperature 5 to 113F / -15 to 45C
    Operating Altitude 0 to 10,000′ / 0.0 to 3048m
    Storage Altitude 0 to 50,000′ / 0.0 to 15,240m
    Noise Level 40 dBA
    Certifications UL, cUL, as per Manufacturer

    Physical

    Cable Length 8.01′ / 2.44m
    Rackmount Size 2 RU
    Dimensions (W x H x D) 17.01 x 3.5 x 19.29″ / 43.21 x 8.9 x 49cm
    Weight 50.4lb / 22.9kg

    Packaging Info

    Package Weight 57.4 lb
    Box Dimensions (LxWxH) 24.75 x 23.25 x 9.5″

    APC 1000VA Reviews

    All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

    Reviews

    There are no reviews yet.

    Be the first to review “APC Smart-UPS X Battery Backup & Surge Protector with SmartConnect VC84643767003”

    Your email address will not be published. Required fields are marked *

    Cart

    Your Cart is Empty

    Back To Shop